Available in 12 volt, 1 alternator, 2 batteries, 120, 180 and 250 amp. All these features result in a shorter charge time than ever previously available when using a battery isolator. An Integrated current limiting feature to prevent overload and short circuit. A Fail-safe In the event of device failure, alternator and engine start batteries remain connected. An Industrial rating capable of sustaining massive overload conditions. An LED display shows status of all channels, whether in use or not, and provides alarm status information. It isolates any batteries where high voltage is present, for example, caused by a separate battery charger. In the event of alternator &/or regulator failure the ProSplit R will disconnect input to prevent batteries from overcharge. Isolates all except the main battery bank in the event of high load discharge. Individually isolates a battery bank immediately upon detection of reverse feed to prevent discharge. Doing so allows the ProSplit-R to permit charging of the auxiliary bank at a higher rate without affecting the other batteries in the same system. Microprocessor control means the ProSplit-R can monitor the charging needs of the auxiliary batteries separately from the engine battery. Zero Volt Drop means no heat due to current induced voltage drop. The ProSplit-R battery Isolator is generations ahead of any battery isolator on the market today. It does all this and still offers only a max voltage drop of less than 0.01 volt! The system also has the ability to disconnect the alternator and individual battery banks in the case of alternator problems or other power items in the system. 
It ensures the batteries are all charged in conjunction with each other and prevents any back feed through the device in the event of high loads on one battery bank. This product uses a microprocessor to monitor the multiple battery banks which are to be charged by an alternator.
Sterling Power USA ProSplit R 123 Zero Volt Drop Marine Battery Isolator - Intelligent Digital Alternator Distribution System (12V, 120 Amp, 3 Output)
0 kommentar(er)
